Compost Disinfection

Here are the solutions trailers for disinfection and terromatic

Disinfection trailer

This general-purpose tool disinfects composts and manipulates it easily using a wheel chassis.

It is available in two versions, with capacities of 0.5 m3 or 1 m3. The disinfection trailer allows for an easy unloading of the product using a tilting vat actuated mechanically or hydraulically.

The bottom of the trailer features a grid designed to diffuse the vapor homogeneously while retaining the compost. A stainless lid with handles covers the top of the trailer so that the unit stays perfectly watertight during disinfection.



Capacity: 2 - 6 m3/hour (depending on the size of the boiler)

Length: 3.5 m
Width: 1 m
Frame steel assembled on pneumatic wheels
Conveyer belt in twined stainless steel wire
Three-phase electric motor with low power consumption


  • High output
  • Easy and flexible compost loading
  • Easy to use and move
  • Easy cleaning with a water jet


The compost is charged in the hopper at the base of the machine. An adjustable trap door located in the hopper sets the thickness of the compost (consequently its volume) on the belt conveyer.

The belt conveyer brings the compost to the vapor chamber of the machine.

Programmable control of the temperature of the compost inside the disinfection tunnel – if the temperature is lower than the target value, the conveyer stops until the temperature increases to the target value.

Water connection at the exit of the disinfection chamber and draining trap at the base for inside washing of the machine.


Agence de création de sites Internet pour les professionnels et les collectivités située à Nantes