Homepage

Planting in Cubic Blocks

Here are our solutions on planting machine for open field, for plastic film and specific machines.

PLANTING MACHINE FOR OPEN FIELD

R862 mechanical planting machine

This mechanical planting machine is light, compact and versatile.
It is ideal for multi-vegetable producers who plant in limited quantities
Planting is carried out in separated blocks, with supply via a peg belt.
For this reason, its performance is lower than the other models (approximately 5000 blocks/hour with 2 operators), but speed depends largely on the capacity of the operators to position the blocks.
With this machine, the quality of the blocks is less important in quality or regularity. It can plant blocks with large leaves as well as parsley, cabbage, chard, onion or celery provided they come in 3.5 to 4.5 cm wide cubes.

Planting height is adjusted via rear press wheels, and row spacing is adjusted by changing gears.

This machine comes in versions for 3, 4 or 5 rows. Row spacing is set according to the customer’s requirements.

Diaporama

R908 mechanical planting machine

This mechanical planting machine is operated in a standing position for better comfort and greater efficiency.

Planting supply is provided in block strips.
Output is increased: over 12,000 blocks/hour with 2 operators.
This machine requires blocks of good quality since their separation is carried out by the planting machine.

Planting height is adjusted via rear press wheels, and row spacing is adjusted by changing gears.

This machine comes in versions for 3, 4 or 5 rows – row spacing is set according to the customer’s requirements.

Diaporama

R2010 pneumatic planting machine

This is a planting machine with electro-pneumatic distribution, i.e. the various movements of the mechanism are actuated by pneumatic jacks.
Those are controlled by electromagnetic valves synchronized by a programmable automaton.
Planting supply is provided in block strips.
The output is up to 24,000 blocks/hour for 2 operators.
The characteristic of this CM REGERO Industries’s planting machine is its 7 cm plowshare, which creates a very narrow furrow to receive a block from 3.5 to 4.5 cm to support the resumption of the plant in the soil.
This increases the output and minimizes soil movement, to avoid the growth of weeds.
Lastly, this plowshare system makes it possible to reduce row spacing down to 17 cm, which is highly appreciated by multi-leaves (e.g. salad) producers.
Air is supplied by a compressor and a filtration/drying unit. The compressor is powered by the tractor’s power take-off for tractor mounted models, and by a hydraulic engine in the self-propelled version.
This machine comes in versions for 3.4 or 5 rows. Row spacing is set according to the customer’s requirements

Diaporama

 

Click here to see a video of this product on YouTube

PLANTING MACHINE FOR PLASTIC FILM

R816 mechanical planting machine

The R816 mechanical planting machine plants the block through a plastic film unrolled on the soil.
This machine is ideal for multi-vegetable producers who plant in limited quantities.
Planting is carried out using separated blocks, and supply is provided via a peg belt. An innovating spade mechanism perforates the plastic film without tearing it, to avoid the growth of weeds. Thus a hole of 4 cm x 4 cm makes it possible to receive the block without having to care about resumption.
For this reason, its productivity is lower than with other models (approximately 3000 blocks/hour with 2 operators), though the speed depends largely on the capacity of the operators to position the blocks.
This machine plants blocks with large leaves as well as parsley, cabbage, chard, onion or celery provided they come in 3.5 to 4.5 cm wide cubes.
The frame planting includes 4 wheels adjusted according to the tractor’s track. It is controlled by a hydraulic lift to avoid packing the soil and slackening the plastic film.
Planting height is adjusted via rear press wheels, and row spacing is adjusted by changing gears.

This machine comes in versions for 3, 4 or 5 rows. Row spacing is set according to the customer’s requirements.

Diaporama

R2106 pneumatic planting machine

This machine plants the block through a plastic film unrolled on the soil.
It features electro-pneumatic distribution, i.e. the movements of the mechanism are actuated by pneumatic jacks, controlled by electromagnetic valves synchronized by a programmable automaton.
An innovating spade mechanism perforates the plastic film without tearing it, to avoid the growth of weeds. Thus a hole of 4 cm x 4 cm makes it possible to receive the block without having to care about resumption.
Planting supply is carried out in lines blocks strip. Output is up to 15,000 blocks/hour for 2 operators.
A spade system perforates the plastic film vertically and deposits the block in the soil in a 4 cm wide hole.

Air is supplied by a compressor and a filtration/drying unit. The compressor is powered by the tractor’s power take-off for tractor mounted models, and by a hydraulic engine in the self-propelled version.

This machine comes in versions for 3.4 or 5 rows. Row spacing is set according to the customer’s requirements

Diaporama

 

Click here to see a video of this product on YouTube

SPECIFIC PLANTING MACHINES

Whether in 14-row tunnels or open field triple bed, CM REGERO Industries will be able to meet your specific needs and to design the machine suited to your cultivation style.

The following achievements highlight the company’s commitment for customization as a hallmark of quality and a guarantee of performance for our customers.

Diaporama

Agence de création de sites Internet pour les professionnels et les collectivités située à Nantes